|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Original well scanned manual. Got the job done. Microwave problem found & corrected. For $5 and a new magnitron from ebay, it was a cheap and good the first shot fix. Electrical schematics allowed me to mage sure every thing else was ok before cutting and order for parts. Hard to live without.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
VIII
S-TIC
1. 2. 3.
4.
ERRORS:
RSA 440:
On all four IC's @PC 1298V), pin 15 and 16 locations are interchanged (rnismarked) on the schematic. On two of the pPC 1298V IC's, (channels one and two only), pins 13 and 11 are connected. Q3,Q28,Q53 and 478 are not the 2N4401 transistor as the schematic im lies, they are an M P S A12 (an NPN Darlington). A static test should show a di e junction from Base to Collector, " + " probe on Base. The input IC U2 on the schematic is labeled LM 833 when actually it is the LM 837N.
d
RSA 450
1. 2. 3.
4.
Some versions R164 is not used; @ms 2 & 3 on IC 151 are connected by C152). Some versions ZD152 is not used. Some versions R152 is 36KQ (instead of 33K on the schematic). The positive lead for R195 is not connected directly to the positive lead of the as the schematic depicts; instead it is connected to the junction of k%D151.
NOTE: These output transistors are k. equivalent:
|
|
|
> |
|
