|
There are currently no product reviews.
 ;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
 ;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
 ;
Good quality, the manual help me to repair the echo/reverb section
 ;
A good service manual with lots of info and a very fair price
 ;
Great value, good scan, just as expected, everything that you need.
1
2
3
4
The numeral enclosed by a circle in the drawing indicates the order of removal.
A
- How to hold the mechanism unit
1. Hold the top frame and main frame. 2. Do not hold the front of the top frame tightly because its strength is low.
B
- How to remove the top frame and main frame
1. Remove the screws (4) and screws (2) of the top frame in the clamped state and remove the top frame. 2. After having removed the screws of the dampers (2) on the right and the dampers, remove the main frame. 3. Remount the product connector with the frame removed and eject a disk.
C
Top Frame
Main Frame
D
Disk
Damper Damper
- How to remove the clamper arm assy and guide arm assy
1. Remove a total of three right, left and rear screws and remove the clamper assy. 2. Remove the left spring and remove the torsion spring hook of the right fulcrum unit. 3. Remove the E ring of the left fulcrum and remove the guide arm assy. Guide Arm Assy
Clamper Arm Assy
E
F
62
RS-D7R�/EW5
1 2 3 4
|