|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent manual - just what I needed. Although currently available only in German, their are lots of pictures which makes it all very clear.
;
PHILIPS PE1642 Owner's Manual
Hi,
you have complet fullfilled my expectance.
Price is OK.
Robert Schmid
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
I Fewer measures than current setting
The excessive measures are cut off. After returning to pattern mode, the deleted measures cannot be restored.
When you change the setting with the [L]/[M] keys or the [VALUE] dial, the indication "E" appears on the display. When you return the setting to the original value, the "E" disappears.
G Setting the volume balance for each track
You can adjust the volume of the drum A, drum B, and bass track in a user pattern. This setting is stored for each user pattern individually.
1 In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
4 When the setting is complete, press the [EXIT] key.
The new setting becomes active and the unit returns to the pattern mode.
2 Use the [ ]/[ ] keys to call up "MIXLVL" on the display.
G Changing the pattern beat
The beat (timing signal) of a user pattern can be adjusted. This setting is stored for each user pattern individually.
Current track Current setting
1 In pattern mode, select the user pattern for which you want to make the setting, and press the [EDIT] key. 2 Use the [ ]/[ ] keys to call up "TIMSIG" on the display.
Current setting
3 Use the [ ]/[ ] keys to select the track for which you want to change the volume. 4 Use the [L]/[M] keys or the [VALUE] dial to set the volume for the track (0 - 15).
When a new pattern is created, the volume for all tracks is set to 15. When wishing to adjust the volume for other tracks, repeat steps 3 and 4.
5 When the setting is complete, press the [EXIT] key.
The unit returns to pattern mode.
3 Use the [L]/[M] keys or the [VALUE] dial to set the beat.
The setting range is 1 (1/4 beat) - 16 (16/4 beat). The initial setting for empty patterns is 4 (4/4 beat). It is possible to change the beat for a pattern that is already input. In this case, the playback content changes as follows. I Longer beat than current setting
Blank space is added to each measure.
G Changing the play timing (shift)
Application Guide [Patterns]
You can change the play timing of the currently selected user pattern.
Application Guide [Patterns]
1 In pattern mode, select the user pattern for which you want to make the setting,
and press the [EDIT] key.
2 Use the [ ]/[ ] keys to call up "SHIFT" on the display.
Current setting
I Shorter beat than current setting
Excessive section of each measure is cut off. After returning to pattern mode, the deleted part cannot be restored.
3 Use the [L]/[M] keys or the [VALUE] dial to shift the timing.
When you change the setting with the [L]/[M] keys or the [VALUE] dial, the indication "E" appears on the display. When you return the setting to the original value, the "E" disappears.
The setting range is -192 to 192 ticks (+-2 beats) in units of 1 tick (1/96 of a quarter note). For example, when the setting value is 24, the pattern changes as follows.
4 To update the setting, press the [ENTER] key. To cancel the process, press the
[EXIT] key.
When you press the [ENTER] key the unit returns to pattern mode.
52
53
|
|
|
> |
|
