ROLAND RT-3T
Owner's Manual

Installing and Connecting
When making connections to other equipment, to prevent malfunction or damage to speakers or other devices, be sure lower the volume all the way before you switch on the power.

� For the RT-7K Kick Trigger
1. Affix the two hoop guards included with the product to both sides of the hoop for the kick drum. Affix these as shown in the figure, at locations where they will not interfere tension bolts at eight to ten o'clock or at two to four o'clock, as seen from the viewpoint of the player.
8�10 o'clock 2�4 o'clock

RT-7K Hoop guards

2. Use a tuning key to loosen the sensor bolt for the RT-7K. 3. Mount the RT-7K at the location of the hoop guards you affixed in step 1, and turn the mounting screw to secure in place. Tighten securely so that the trigger won't come loose and fall.

5