|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Freezer Interior
Freezer Shelves The freezer sbelves can be adjusted to any of four positions to accommodate the food load. To remove the shelf: 1. Lift up on the shelf and push to the right, 2. Tilt the left side of the shelf up and remove. To replace the shelf:
SPECIAL STORAGE AREAS
Crispers
There are two types of crisper drawers in your Maytag refrigerator. The Varl Crisper allows the amount of moisture in the crisper to be controlled for storing either fruits or vegetables. The Fresh Crisper is ideal for storing vegetables.
1. Tilt the shelf and insert the right rod ends into the upper portion oftbe oblong holes in the freezer wall. 2. Lower the left side of the shelf aud insert into the oblong holes on the left side. Make sure the shelf is secure before loading.
Setting
the
Vari
Crisper
Control
Move the slide control to "Fruits" for a low moisture environment and to "Vegetables" for high moisture.
To remove the Crisper Drawers: 1. Pull out to the stop position. 2. Tilt up the drawer front and pull out. To replace the Crisper Drawers:
1. Align the drawer rollers in the tracks. 2. Lift the drawer front and push in. To remove the Crisper Shelf:
1. Remove the crisper drawers. 2. Remove the glass insert. Reach in from the uncterside and tilt up. Carefully remove the insert. 3. Lift the front of the crisper shelf and pull out. It may be necessary to remove the lower refrigerator shelves so the crisper shelf can be tilted for removal. To replace the Crisper Shelf:
Reverse the procedure for removing the crisper shelf.
i
PAGE 6
|
|
|
> |
|
