|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
RX-5032VSL
2.5 Removing the tuner board (See Fig.6) � Prior to performing the following procedure, remove the top cover and rear panel. (1) Remove the tie band fixing the parallel wires. (2) Disconnect the tuner board from the connector CN411 on the audio board.
Tie band
Parallel wires
CN411
Tuner board
Audio board CN461 S Video board
2.6 Removing the audio board (See Fig.7) � Prior to performing the following procedure, remove the top cover, rear panel, DSP board, audio input board, DVD board, video board and tuner board. (1) From the top side of the main body, disconnect the card wire from the connector CN402 on the audio board. (2) Disconnect the relay board from the connectors (CN291, CN491) on the power supply board and audio board. (3) Disconnect the wires from the connectors CN471, CN472 and CN473 on the audio board. (4) Remove the three screws G attaching the audio board. (5) Loosen the screw H attaching the audio board.
CN511
Fig.6
Parallel wire
CN472
Relay board
Power supply board CN291
CN471
CN473 Card wire
G H
Audio board CN402
G
Fig.7
CN491
1-6 (No.22028)
|
|
|
> |
|
