JVC RX-5062SUT
Owner's Manual

CD changer After pressing CD-DISC, you can perform the following operations on a CD changer:
3: 4: ¢: 7: 8: 1 � 6, 7/P: Start playing. Return to the beginning of the current (or previous) track. Skip to the beginning of the next track. Stop playing. Pause playing. To resume, press 3. Select the number of a disc installed in a CD changer.

Operating Video Components
VCR You can always perform the following operations:
STANDBY/ON VCR: Turn on or off the VCR. VCR CH +/�: Change the TV channels on the VCR. After pressing VCR, you can perform the following operations on the VCR: 3: REW: FF: 7: 8: REC PAUSE: Start playing. Rewind the tape. Fast-forward the tape. Stop playing, recording, rewind and fast forward. Pause playing and recording. To resume, press 3. Enter recording pause. To start recording, press this button then 3.

After pressing CD, you can perform the following operations on a CD changer: 1 � 10, +10: Select a track number directly. For track number 5, press 5. For track number 15, press +10, then 5. For track number 20, press +10, then 10. For track number 30, press +10, +10, then 10. Example: � Selecting disc number 4, track number 12, and starting playback. 1 Press CD-DISC, then press 4. 2 Press CD, then press +10, 2. If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301), you can do the following operations using the number buttons after pressing CD. 1 2 3 Select a disc number. Then select a track number (always enter two digits). Press 3 to start playback.

DVD player
You can always perform the following operation: STANDBY/ON DVD: Turn on or off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player: 3: 4: ¢: 7: 8: Start playing. Return to the beginning of the current (or previous) chapter. Skip to the beginning of the next chapter. Stop playing. Pause playing. To resume, press 3.
2 4
MENU

Examples: � Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then 3. � Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then 3. � Selecting disc number 105, track number 12, and starting playback. Press 1, 0, 5, then 1, 2, then 3.

After pressing DVD, these buttons can be used for the DVD menu operations.

6 8

Note:
For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.

7/P
ENTER

10

TV
You can always perform the following operations: STANDBY/ON TV: Turn on or off the TV. TV CH +/�: Change the channels. TV VOLUME +/�: Adjust the volume. TV/VIDEO: Set the input mode (either TV or VIDEO). After pressing TV SOUND, you can perform the following operations on the TV: 1 � 9, 0, 100+ (+10): Select the channels. RETURN (10): Alternate between the previously selected channel and the current channel.

Note:
It is required to press each button within 4 seconds in the above procedure.

29

English