JVC RX-D702BJ
Owner's Manual

Memorizing the volume level for each source�ONE TOUCH OP
This receiver memorizes some settings separately for each source. In addition, you can store the volume level for each source with the other memorized settings. (See page 22.) � This receiver memorizes the volume level � when you turn off the power, and � when you change the source. ONE TOUCH OP: ON Select to store the volume level separately for each source. (The ONE TOUCH OPERATION indicator lights up on the display.) ONE TOUCH OP: OFF Select this not to store the volume level. Initial setting: ONE TOUCH OP: OFF To recall the volume level With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected. To cancel the One Touch Operation Set One Touch Operation to �ONE TOUCH OP: OFF� so that the ONE TOUCH OPERATION indicator goes off from the display.

Selecting the output video signals �VIDEO OUTPUT
To use the video conversion function (see page 9), you need to select this setting according to the connection method for a TV. VIDEO OUTPUT: HDMI Select this when connecting a TV with the HDMI cable. VIDEO OUTPUT: CMPNT Select this when connecting a TV with the component video cable. VIDEO OUTPUT: S Select this when connecting a TV with the S-video cable. VIDEO OUTPUT: C Select this when connecting a TV with the composite video cable. Initial setting: VIDEO OUTPUT: HDMI NOTE To transmit the video signals selected in this setting, you need to connect a TV and this receiver with the cable which can transmit the selected video signals.

Selecting the source for HDMI terminal and COMPONENT VIDEO jacks�HDMI SELECT/ CMPNT SELECT
When you connect a VCR or a DBS tuner to the VCR (DBS) IN terminal (jacks) in HDMI terminal or COMPONENT VIDEO jacks on the rear of the receiver, you need to select either �VCR� or �DBS� according to the component you connect. If you have not selected appropriate source, you cannot view the playback picture on the TV. For the HDMI terminal: HDMI SELECT: VCR Select this when assigning the HDMI terminal for a VCR. HDMI SELECT: DBS Select this when assigning the HDMI terminal for a DBS tuner. Initial setting: HDMI SELECT: VCR For the COMPONENT VIDEO jacks: CMPNT SELECT: VCR Select this when assigning the COMPONENT VIDEO jacks for a VCR. CMPNT SELECT: DBS Select this when assigning the COMPONENT VIDEO jacks for a DBS tuner. Initial setting: CMPNT SELECT: VCR

Superimposing the menus �SUPERIMPOSE
You can select whether or not to superimpose the on-screen display on the TV screen. SUPERIMPOSE: ON Select to superimpose the on-screen display on the TV screen. SUPERIMPOSE: OFF Select to cancel superimposition. The on-screen display will be shown on the blue background screen. Initial setting: SUPERIMPOSE: ON NOTES � Some on-screen displays appear on the TV screen regardless of this setting. � When the video input setting (see page 20) is set to �CMPNT,� the on-screen display will be shown on the blue background screen even though �SUPERIMPOSE� is set to �SUPERIMPOSE: ON.� � The on-screen display does not appear on the TV screen when the video input setting (see page 20) is set to �HDMI.�

32