|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
Activating the Sub-Room Front Speakers
This section is NOT applicable to those who connect the subroom front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17). Before you start, remember... � When shipped from the factory, both pairs of the front speakers have been set to be used in the main room. To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals in the sub-room, see �Preparing for the Sub-Room Operations�SUB ROOM� on page 40.
Muting the Sub-Room Sound
From the remote control ONLY:
Press MUTING to mute the sound through the sub-room front speakers.
MUTING
SPEAKERS
1
SUB ROOM
On the unit ONLY:
The volume level indicator goes off.
SPEAKERS 2 / SUB ROOM
Press SPEAKERS 2/SUB ROOM to activate the sub-room front speakers.
The SUB ROOM speaker indicator lights up on the display.
To restore the sound, press MUTING again so that the volume level indicator appears on the display. � Turning MASTER VOLUME on the unit or pressing VOLUME +/� on the remote control also restores the sound.
Lights up
SPEAKERS 1 SUB ROOM
SPEAKERS
1
SUB ROOM VOLUME
VOLUME
dB
dB
To deactivate the sub-room front speakers, press SPEAKERS 2/SUB ROOM again. The SUB ROOM speaker indicator goes off.
Note:
Sounds through the sub-room speakers connected to the SUB ROOM PREOUT jacks are also muted.
Note:
If the center speaker or surround speakers are used for the Surround/ DSP mode (see pages 46 and 50) for the main room operations, the SPEAKERS 2/SUB ROOM button does not work.
For those who connect the sub-room front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17). You have to determine how to adjust the volume level through the sub-room front speakers. (See �Preparing for the Sub-Room Operations�SUB ROOM� on page 40 for more details.) To use the sub-room front speakers 1 Turn on the other amplifier connected to the SUB ROOM PREOUT jacks. 2 Adjust the volume level of sub-room front speakers either on the other amplifier or on this receiver (depending on the SUB PREOUT setting on the SUB ROOM submenu).
30
|
|
|
> |
|
