I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Text excerpt from page 4 (click to view)
Installation
The refrigerator should be located away from direct sunlight and heat sources such as registers, radiators or any cooking products. In accordance with ISO standards, your refrigerator is performance rated at Class N, 16°C to 32°C (61°F to 90°F) or at Class ST, 18°C to 38°C (65°F to 100°F). Internal temperatures may be affected by such factors as its location, ambient temperature, and the frequency of door openings. Allow space around the unit for good air circulation. Allow a 25mm (1 inch) space behind and a 10mm (3/8 inch) space above the refrigerator for adequate ventilation. In a recessed installation, allow an extra 10 - 15 mm (½ inch) on each side for ease of installation. If the side of the unit will be placed against a wall, allow 13 mm (½ inch) space for proper door opening.
Installation
TO ADJUST THE FRONT ROLLERS
1. Open both doors. 2. Remove the toe grille by pulling it straight out. 3. Adjust the rollers by turning each roller adjusting bolt with a wrench until the refrigerator is level and stable. The rear rollers are not adjustable. 4. Check both doors to ensure that the seals touch the cabinet on all sides. 5. Replace the toe grille by lining up the retainers with the holes and pushing the grille straight on.
TIPS:
� If the freezer door is higher than the refrigerator door, raise the right corner and/or lower the left corner until the doors align across the top of the cabinet. � If the refrigerator door is higher than the freezer door, raise the left corner and/or lower the right corner until doors align across the top of the cabinet.
TIPS:
� Proper air circulation and leveling will assure efficient operation of your refrigerator. Do not use an extension cord. If refrigerator has an ice maker, locate it near a water supply. Remove all packing materials and tape. Wash interior with a mild soap and warm water. Do not use a razor blade or knife to remove tape.
