I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 14 (click to view)
4 - Operating your refrigerator
Spill safe glass shelves (where fitted)
Spill safe glass shelves keep spills on the shelf. A shelf retaining system minimizes accidental movement of shelves. The shelves can be adjusted to many different heights. Spill safe glass shelves are not to be used as slide out shelves. if your appliance door happens to have limited access.
Deodoriser
Your refrigerator is fitted with a catalysing deodoriser to assist with the removal of food odours inside your refrigerator. It is located at the air return so odours are removed by adsorbtion through the filter by the normal operation of the refrigerator (see diagram 1). Keeping food covered and wrapping food with plastic wrap will also help to reduce the odours inside your refrigerator.
Split Glass Shelf (where fitted)
This shelf can be used either as a full depth shelf or when tall items need to be stored at the front of the refrigerator it can be collapsed to half its original depth. To collapse the shelf:
Diagram 1
Bottle Snugger operation (where fitted)
The bottle snugger is used to prevent bottles from falling over. The snugger consists of two parts, a sliding front, and a rotating retainer ring. The retainer ring can be rotated through 360° but has positive locations for horizontal and vertical positions.
� Pull the front half of the shelf forward (1), then, from the underside, lift the front half of the shelf by raising the rear edge over the recessed hook detail (2). � Pull the shelf forward and allow the rear to drop into the side channels.
The snugger can be used in two positions:
Horizontal
When the snugger ring is horizontal (A), any item that fits within the ring can simply be placed inside it.
� Push the front shelf backwards (3,4) until it reaches the rear stops.
When the snugger ring is A vertical (B), it is possible to simply slide the snugger along the bottle retainer bar until it is pushed up against a bottle. Note: the bottle should be constrained on the other side by either the end of the bin or other adjacent bottles.
Vertical
B
Repositioning: The shelf can be repositioned within the refrigerator unit by pulling the whole assembly out until the side panels are free to pivot down, then pivoting the rear of the shelf until the shelf is free from the liner runners. The shelf can then be positioned in any of the runners � this is a very useful feature Page 14
