|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I do not have very much to say.
The price is quite covenient, delivery was better as promised (about 12 ours, against the specified 24 hours if I remember well), and the quality of the PDF is more than acceptable.
The Service Manual of Sansui R30 itself is also satisfactory: good graphic for schematics and layouts, simple and well structured.
Giovanni Bianchi
;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
ORDER NO.
RRV2017
SPEAKER SYSTEM
S-A770V
S-A770V
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external screws. To detach the cosmetic baffle assy, loosen these screws. Then carefully disconnect the wires of the woofer, mid-range and tweeter mounted on the cosmetic baffle assy. To attach the cosmetic baffle assy, replace it on the cabinet correctly and secure with 4 screws. The woofer is attached to the cosmetic baffle assy together with the woofer ring assy by 4 internal screws. To detach the woofer (woofer ring assy), loosen these screws. To attach the woofer ring assy, fit the boss of the woofer ring to the hollow of the cosmetic baffle assy. To attach the woofer, face its terminal upward, and fit the boss of the cosmetic baffle to the hollow of the flame. To attach the woofer ring assy and the woofer, replace it on the cosmetic baffle assy correctly and secure with 4 screws.
XJI/E
XJI/NC
This product is component of system. For the operating instructions, refer to the service manual RRV2008 for XR-A770.
The mid-range is attached to the cosmetic baffle by 3 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The tweeter is attached to the cosmetic baffle by 2 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The network assy is attached to the back board of the cabinet by press-fitting. To detach the network assy, strike the cordstopper of the network assy with a hammer from inside of the cabinet. To attach the network assy, replace it on the back board of the cabinet correctly by press-fitting.
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
T-ZZW SEPT. 1998 Printed in Japan
|
|
|
> |
|
