|
Who's Online
There currently are 5648 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
SA-DM3P/SA-DM3PC
Step 11 Remove the front panel as arrow shown.
Step 5 Remove the cabinet as arrow shown. Step 6 Remove the both side panels as arrow shown. Step 7 Disconnect the connector CN501A. Step 8 Remove the screw.
Step 12 Release all the catches and pull out the MECHA BASE as arrow shown. Step 13 Remove the volume knob from front panel. Step 14 Remove all the screws.
Step 9 Disconnect all the connectors CN901, CN401B, CN301 and CN601A from Main P.C.B..
Step 15 Slightly push down the claw and pull out the SUB Panel.
Step 10 Remove 2 screws, lift up the snaps at 2 locations shown. 10
|
|
|
> |
|