|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
;
excellent value & price! Includes everything you need to know about the NN-C777! I would buy this again.
;
Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
 ;
Generally speaking good copy; a few pages too hard contrast...
Good service and communication.
� Avoiding interference
To avoid possible interference, do not place the wireless system near any of the following devices.
The wireless system uses the same radio frequencies as other devices that may be present in your home. e.g.
2.4GHz-band microwave oven
personal computer with 2.4GHz-band wireless LAN
2.4GHz-band cordless phone
The wireless system will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator (� [W] �) flashes on the main unit, and there is a brief interruption in audio coming from the surround speakers. This is the normal operation of the product working to assure the best possible performance of your Home Theater System. If the interference persists, try moving the other devices to another location outside the range of the wireless system.
Speaker installation options
� Attaching to a wall
You can attach all of the speakers to a wall. � The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. 1 Drive a screw (not included) into the wall.
� Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram. � The stands must be able to support over 10 kg (22 lbs). � The stands must be stable even if the speakers are in a high position.
e.g. Center speaker �4.0 mm (5/32q) Wall or pillar �7.5 to 9.5 mm (19/64q to 3/8q) 5.0 to 7.0 mm (3/16q to 9/32q) Metal screw holes For attaching to speaker stands
2 Fit the speaker securely onto the screw(s) with the hole(s). Front speaker Center speaker
RQT8779 Positioning the speakers
5 mm (3/16q), pitch 0.8 mm (1/32q)
Plate thickness plus 7 mm to 10 mm (plus 9/32q to 13/32q) 200 mm (7 7/8q)
60 mm (23/8q)
Speaker stand (not included)
Surround speaker
e.g.
In this position, the speaker will likely fall if moved to the left or right.
Move the speaker so that the screw is in this position.
Simple Setup
5
|
|
|
> |
|
