|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
SA-HT930P / SA-HT930PC / SA-HT930PX
11.6. Removal of the Tray Base Guide (L) and Tray Base Guide (R)
· Follow the (Step 1) - (Step 2) of Item 11.1. · Follow the (Step 1) - (Step 4) of Item 11.2. · Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Rotate open lock gear in the direction of arrow. (Anticlockwise)
Step 1 Remove the 2 screws. Step 2 Remove the tray base guide (L) and tray guide (R) in the direction of arrow.
11.7. Removal of the Rotary Tray
· Follow the (Step 1) - (Step 2) of Item 11.1. · Follow the (Step 1) - (Step 4) of Item 11.2. · Follow the (Step 1) - (Step 5) of Item 11.3. Step 2 Release claw of open lock gear, remove open lock gear in the direction of arrow.
11.9. Removal of the Close Lock Gear
· Follow the (Step 1) - (Step 2) of Item 11.1. · Follow the (Step 1) - (Step 4) of Item 11.2. · Follow the (Step 1) - (Step 5) of Item 11.3. · Follow the (Step 1) - (Step 2) of Item 11.5. Step 1 Remove 1 screw.
Step 1 Remove tray screw, tray spring and teflon washer. Step 2 Remove rotary tray.
11.8. Removal of the Open Lock Gear
· Follow the (Step 1) - (Step 2) of Item 11.1. · Follow the (Step 1) - (Step 4) of Item 11.2. · Follow the (Step 1) - (Step 5) of Item 11.3. · Follow the (Step 1) - (Step 2) of Item 11.5. Step 2 Hook close lock spring to claw (a).
23
|
|
|
> |
|
