|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
Setting Up Your Digital Satellite Receiver (SYSTEM) (continued)
Selecting an Antenna Type
The Antenna Type display lets you or your professional installer enter which type of Satellite Dish Antenna you use. After you have entered your antenna type, you can use the Antenna Location pop-up to help aim your antenna.
1
Highlight and select �Antenna Type� from the Antenna Display.
The Antenna Type display appears.
2
Highlight and select the Satellite Dish Antenna type that you have installed.
The SignalSeeker pop-up appears if you have selected �Round�. Skip to step 4 if you selected �Oval 2-Sat� or �Oval 3-Sat�.
3
z Tip
Selecting �off� in the SignalSeeker pop-up may allow you to see the Signal Strength Meter if you use a diplexer or certain other accessories with your Satellite Dish Antenna.
Highlight and select �On� if you selected �Round�.
The SignalSeeker pop-up closes to show the Antenna Type display.
Note
The SignalSeeker feature is available only with the Round Antenna. Refer to your Satellite Dish Antenna Installation Instructions for more information about this feature.
4
Select �Return�.
The Antenna Type display closes to show the Antenna display.
24
|
|
|
> |
|
