|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Cassette tape
Top of unit
Disc lid
CD OPEN/CLOSE 0
Basic play
Recording the radio
1
Press [0] and insert the cassette.
1 2 3
Insert the cassette to be recorded. Tune to the required station (refer to page 10). Press [¶ REC/8] to start recording.
Forward side
Insert inside the guides
Recording discs
2 3
To
Close the lid by hand. Press [TAPE 3] to start play.
To play the other side of the cassette, turn the cassette over. Action Press [ 7 ]. Press [TAPE 3] when the unit is OFF with the cassette loaded. Press [ /REW/4] or [ /FF/¢] in the stop mode.
1 2 3 4 5
Insert the cassette to be recorded. Push [CD OPEN/CLOSE 0] to insert the disc and close the lid. Press [CD 3/8] and then [7, �DEMO]. Press [PLAY MODE] to select your desired mode (refer to page 7). Press [¶ REC/8] to start recording.
stop tape playback start one-touch play fast-forward and rewind
Recording programmed tracks
Note � Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. � Endless tapes can get caught up in the deck�s moving parts if used incorrectly.
1 2 3
Insert the cassette to be recorded. Program the tracks you want (refer to page 8). Press [¶ REC/8] to start recording.
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track, up to a maximum of 9. Press [ /REW/4] or [ /FF/¢] during play. Play resumes from the track found.
Note TPS may not function properly: � with short silent parts � when noise occurs between tunes � if silent parts are found within tunes
Other basic operations
To erase a recorded sound stop recording stop recording temporarily record on the other side of the tape Action 1) Insert the cassette to be recorded. 2) Press [TAPE 3] and then [7, �DEMO]. 3) Press [¶ REC/8]. Press [ 7 ]. 1) Press [¶ REC/8]. 2) Press again to resume recording. Turn the cassette over and press [¶ REC/8].
RQTV0080
Recording
Use normal position tapes. High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly. Preparation Wind the leader tape so that recording can begin immediately.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.
Side A To re-record Normal tape
Tab for side B
Tab for side A
Adhesive tape
9
English ENGLISH
|
|
|
> |
|
