|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
SA-PT660P / SA-PT660PC
Step 2 Screw the TR spring to the heatsink unit A. Step 3 Use a blower to remove the minute particles that might be caused after the process of the screwing TR spring to the heatsink unit A.
Step 2 Remove 1 screw. Step 3 Remove the TR spring in the direction of arrows. Step 4 Remove the digital amp IC (IC5300) from the heatsink unit A. Caution: Handle the heatsink unit A with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Step 4 Solder pins of the digital amp IC (IC5300) on the reverse side of D-Amp P.C.B.
Note: Refer to the diagrams of D-Amp P.C.B. (Item 20.4.) for location of the part.
Special Note: Ensure pins of the digital amp IC (IC5300) are properly seated and soldered on D-Amp P.C.B. Step 5 Follow (Step 5) to (Step 6) of Item 9.15.1.
9.16.1. Assembly of Digital Amp IC (IC5300)
Step 1 Fix the digital amp IC (IC5300) to the heatsink unit A.
58
|
|
|
> |
|
