|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete service manual in very good scanning quality with all schematic and PWB graphics as well as assembly & maintenance instructions. A slight drawback is that the rastering of the PWB graphics sometimes makes it a bit difficult to follow fine traces, but no showstopper.
;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site. Thank you very much
 ;
Service manual in good quality, it was very helpful to me. Perfect service, I am very satisfied.
Jochen Kelm
;
Exellent manual ,it was in great condition,and got all the info i expected,5 stars!!
;
I searched the Internet exhaustively for this manual and Owner-Manuals was the least expensive...but provided an excellent reproduction within 4 hours. Very satisified.
SA-PT950P / SA-PT950PC
Caution: Handle the heatsink unit D with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Caution: Handle the small heat sink with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
10.24. Disassembly of Tray Guide (L) & Tray Guide (R)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove 2 screws from the tray guide (L) and the tray guide (R) . Step 2 Remove the tray guide (L) and the tray guide (R) in the direction of arrow.
10.23. Disassembly of Regulator Diode (D5702)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. · Follow (Step 1) to (Step 7) of Item 10.18. Step 1 Desolder pins of the regulator diode (D5702) on the back side of SMPS P.C.B.
10.25. Disassembly of Rotary Tray
· Follow (Step 1) to (Step 3) of Item 10.3. Step 2 Remove 1 screw. Step 3 Remove the regulator diode (D5702) from the small heat sink. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove the screw and the tray spring. Step 2 Remove the rotary tray in the direction of arrow. 66
|
|
|
> |
|
