The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
downloaded next day , manual is very helpful , fast and easy
Text excerpt from page 66 (click to view)
Setting Up Your Digital Satellite Receiver (SYSTEM) (continued)
Selecting an Antenna Type
The Antenna Type display lets you or your professional installer enter which type of Satellite Dish Antenna you use. After you have entered your antenna type, you can use the Antenna Location pop-up to help aim your antenna.
1
Highlight and select �Antenna Type� from the Antenna Display.
The Antenna Type display appears.
2
Highlight and select the Satellite Dish Antenna type that you have installed.
The SignalSeeker pop-up appears if you have selected �Round�. Skip to step 4 if you selected �Oval 2-Sat� or �Oval 3-Sat�.
3
z Tip
Selecting �off� in the SignalSeeker pop-up may allow you to see the Signal Strength Meter if you use a diplexer or certain other accessories with your Satellite Dish Antenna.
Highlight and select �On� if you selected �Round�.
The SignalSeeker pop-up closes to show the Antenna Type display.
Note
The SignalSeeker feature is available only with the Round Antenna. Refer to your Satellite Dish Antenna Installation Instructions for more information about this feature.
4
Select �Return�.
The Antenna Type display closes to show the Antenna display.