|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
XP SBC HC 410/00
14-05-2001 14:23
Pagina 7
Installation
Notes: Completely �at batteries need approximately 16 hours to recharge. The FM headphone will switch off automatically during recharging. Always remove the batteries if the headphone is not to be used for a long period of time. Batteries contain chemical substances, so they should be disposed of properly.
Audio Connections
Audio Connections
IMPORTANT Use only 1 of the audio inputs: 3.5 mm stereo headphone audio input OR the line audio input! Using both audio inputs at the same time may damage your FM wireless system or your audio source! Option 1 (�gure 4) Connecting the FM transmitter to a line output of an audio source, e.g. REC OUT, LINE OUT. 1 Connect the 3.5mm stereo plug of the stereo audio cable to the FM transmitter�s 3.5mm headphone input. 2 Connect the 2 RCA plugs of the stereo audio cable to a line output (REC OUT or LINE OUT) of an audio source, e.g.TV, HiFi or PC: � Check if the red RCA plug (right channel) is connected to the right channel (red) of the audio source. � Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source. 3 Switch on your audio source.The red power indication LED of the transmitter lights up if receiving an audio signal. 4 In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level. 5 Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 6 To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up.
Headphone battery replacement (�gure 3)
IMPORTANT Use only rechargeable LR03/AAA NiMH batteries (preferably Philips). Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system! 1 Remove the earcushions. 2 Take out the batteries and dispose of them properly. 3 Insert new batteries. Only use LR03/AAA NiMH batteries (preferably Philips). 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. 5 Put the earcushions back on the earshells. IMPORTANT Before using the FM headphone for the �rst time, please ensure that the batteries are fully charged for about 16 hours.This will guarantee a longer operating lifetime of the batteries.
7
English
|
|
|
> |
|
