|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
 ;
Copy of genuine owners/operators manual, very useful
 ;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
 ;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
 ;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Installation
Headphone battery replacement (�gure 3)
IMPORTANT Use only rechargeable LR03/AAA NiMH batteries (preferably Philips). Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system! 1 Open the headphone�s battery compartment. 2 Take out the batteries and dispose of them properly. 3 Insert new batteries. Only use LR03/AAA NiMH batteries (preferably Philips). 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. 5 Close the battery compartment. IMPORTANT Before using the FM headphone for the �rst time, please ensure that the batteries are fully charged for about 16 hours.This will guarantee a longer operating lifetime of the batteries. Connecting the FM transmitter to a headphone output of an audio source (�gure 4) 1 Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC. � In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.
Audio Connections
2 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 3 Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 4 To tune, turn the tuning wheel until the signal is at its clearest and the tuning indicator will light up. 5 Adjust the volume to the desired level with the headphone volume control. Basic operation When the FM transmitter is connected to a headphone output of an audio source. 1 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 2 Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 3 To tune, turn the tuning wheel until the signal is at its clearest and the tuning indicator will light up. 4 Adjust the volume to the desired level with the headphone volume control. English 7
|
|
 |
> |
|