|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Nice manual. Clear copy and very rare, to boot. Great price, too!
 ;
Excellent service manual. Complete service info. with schematics, step-by-step instructions and illustrations. Well worth the price!
;
Great product, helped me to restore vintage walkman cassette.
Just some pictures could be little bit more sharp and contrast
Thank you
;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
;
Thank you for your shop manual! Your help was very useful - the device is repaired! Once again - Thank you! I wish you a successful business! Edward (Russia).
PLAYBACK
NORMAL PLAYBACK
Make sure ... � The unit must be turned on.
STILL PICTURE
You can view a still picture on the TV screen during playback (the Still mode). Hit [PAUSE/STILL F] during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Hit [PLAY/K] to return to playback. K NOTES: � Usually there will be video �noise� lines (black and white streaks or dots) on the screen. This is normal. If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the �noise� lines. This is not a fault of the machine, but is a byproduct of the technology involved in producing a unit with 2 video heads. If the unit is left in the Pause mode for more than 5 minutes, the unit will automatically switch to the stop mode.
1
Insert a prerecorded tape
If the erase-prevention tab has been removed, the unit will start playback automatically.
2
To begin playback
PLAY B
Hit [PLAY/K]. K NOTE: � If any menu is activated on the screen, [PLAY/K] does not funcK tion. Hit [MENU] to exit the menu. Then, hit [PLAY/K]. K
�
STOP
3
To stop playback
Hit [STOP/L]. L
NOISE CANCEL (in the Still mode)
This feature allows you to reposition or reduce the noise lines of a still picture. Hit [PAUSE/STILL F] so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: � This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the �noise bars�. This is normal.
TRACKING ADJUSTMENT � Tracking adjustment will be set automatically �
(Digital Auto Tracking function) when you start playback. Noise lines (black and white streaks) may appear on the playback picture when playing pre-recorded tapes or tapes recorded on other VCR. If this occurs, press [CHANNEL K/L] until the streaks disappear. To return to the Digital Auto Tracking function, stop the tape once and start playback.
VERTICAL HOLD CONTROL
In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing [CHANNEL K/L]. NOTE: � If there are video noise lines on the screen, reposition or reduce them. Refer to �NOISE CANCEL� above.
- 18 -
EN
|
|
|
> |
|
