|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Set Check
92. SET CHECK SET TEST START 10. TOTAL CHECK 120. MANUAL CHK 121. LOAD IN ? (Not used.) 122. SPIN UP ?
0. IC&FL CHECK ?
11. AUTO CHECK ?
1. TOTAL CHECK ?
12. MANUAL CHK ?
2. F.JUMP CHECK ?
13. DISP RSLT ?
123. PARAMETER ?
3.HYB CHECK ?
TOTAL CHK END ?
124. READ TOC&PSP ?
4. DISP ERROR ?
125. 1/3 SEEK ?
END ??
126. 1-M SEEK ?
127. ERROR RATE ?
128. HENSHIN ?
129. SPIN DOWN ? 12A. LOAD OUT ? (Not used.) MAN. CHK END?
Press the [lAMS L dial when No.sssss sssss*1 is displayed, and a checking for that display will start or the lower layer ] will be selected. For the selection on the same layer, rotate the [l AMS L dial. It is looped on the same layer, and when �END?� is ] displayed, press the [l AMS L dial to return to the upper layer. ] *1 s denotes a displayed character. Manual Check Method In the �12. MANUAL CHK�, individual checks (121. LOAD IN to 12A. LOAD OUT) are possible.
Example: If 124. READ TOC of 12. MANUAL CHECK is to be checked.
Setting Method: 1. After setting the test mode, rotate the [l AMS L] dial to select �92. SET CHECK� and press the [ l AMS L] dial to enter. 2. When �SET TEST START� is displayed, rotate the [l AMS L] dial clockwise by 2 clicks to select �1. TOTAL CHECK?� and press the [l AMS L] dial to enter. 3. When �10. TOTAL CHECK� is displayed, rotate the [ l AMS L] dial clockwise by 2 clicks to select �12. MANUAL CHK?" and press the [l AMS L] dial to enter. 4. When �120. MANUAL CHK� is displayed, rotate the [ l AMS L] dial clockwise by 4 clicks to select �124. READ TOC&PSP?� and press the [l AMS L] dial to enter. 5. A checking will start automatically.
Note: In making a check, the disc must be loaded. Immediately when a check started, the tray is drawn into the set. Also, the tray can be opened/closed even during the set check mode.
57
|
|
|
> |
|
