PANASONIC SC-HT928
Owner's Manual

Other speaker setup options
� Attaching to a wall
1 Drive a screw (not included) into a wall. 2 Fit the speaker securely onto the screw(s) with the hole(s). �The wall or pillar on which the Wall or pillar speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. �When mounting the front and surround speaker to a wall, we recommend using a string (not included) to prevent it from falling (� page 5). �Use of optional speaker cables is recommended for wall-mounted front and surround speakers. (You can also remove the speaker cables from the pipes supplied with this system.) Front and surround speakers Center speaker

Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit�s service life. Do not place heavy items on the unit.

Voltage
Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other places where DC is used.

AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.

230 mm

150 mm

Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

In this position, the speaker will likely fall if moved to the left or right.

Move the speaker so that the screw is in this position.

Service
� Fitting speaker stands (not included)
(Center speaker only) Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram. �The stands must be able to support over 10 kg. �The stands must be stable even if the speakers are in a high position. Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Safety precautions/Maintenance Other speaker setup options

5 mm, pitch 0.8 mm 60 mm Speaker stand (not included) Plate thickness plus 7 to 10 mm Attach the stands to these metal screw holes.

Maintenance
Clean this unit with a soft, dry cloth. �Never use alcohol, paint thinner or benzine to clean this unit. �Before using chemically treated cloth, carefully read the instructions that came with the cloth. Before moving the unit, ensure the disc trays are empty. Failure to do so will risk severely damaging the discs and the unit.

RQT7436

30