|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
 ;
Exactly what was needed to assess the product - excellent value and great service
 ;
Nice to have the service manual for the Sony DCR-TRV345E now. The document is of excellent quality.
 ;
MACKIE HR824 26 pages English-only Service Manual contains:
1) HR824 technical overview with the description of front and rear panel switches.
2) HR824 specs
3) Block Diagram
4) Wiring Diagram
5) Packaging management
6) Spare part & final assembly list (for PCB rev A and B) + exploded view
7) Test Procedures (where, how to measure voltage...) including Test Point diagram on the PCB.
8) IC and Transistor charts.
Excellent guide: very clear, good scan quality enabling us to print readable diagram :-)
Note:
Mackie HR824 make extensive use of surface mount devices (SMD). Service on the HR824 must
only be undertaken by experienced service technicians with the right tools, experience and patience to perform surface mount rework when needed.
 ;
This Service manual is very well scanned and its clean to read, no any anti-theft words that un-english could understand. I got my CCD600 working with this manual and it´s clear shematics :)
SCPH-9000 SERIES
Reproduction Prohibited
SECTION 1 SPECIFICATIONS
SCPH-9000
General
Power requirements 100 V AC, 50/60 Hz Power consumption 9W Dimensions 270 � 60 � 188 mm (w/h/d) Mass 1.2 kg
SCPH-9002/A/B/C
Laser diode properties
� Material : GaAlAs � Wavelength : 1 = 780 nm � Emission duration : Continuous � Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block)
Inputs/Outputs on the rear
Serial I/O port (1)
General
Power requirements 220-240 V AC, 50 Hz Power consumption 10 W Dimensions 270 � 60 � 188 mm (w/h/d) Mass 1.2 kg
Laser diode properties
� Material : GaAlAs � Wavelength : 1 = 780 nm � Emission duration : Continuous � Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block)
Outputs on the rear
AV Multi out port (1)
Outputs on the rear
AV Multi out port
Supplied accessories
AC power cord (1) A/V connecting cable (1)
(except for the SCPH-9002B)
Supplied accessories
AC power cord (1) A/V connecting cable (1) Analog controller (1) Instruction manual (1)
Inputs/ Outputs on the front
Controller ports (2) Memory card slots (2)
Inputs/ Outputs on the front
Controller ports (2) Memory card slots (2)
Analog controller (1) Instruction manual (1) RFU adaptor (1)
(for SCPH-9002B)
AV-connector plug (1)
(for SCPH-9002C)
Inputs/Outputs on the rear
Serial I/O port (1)
SCPH-9001
General
Power requirements 120 V AC, 60 Hz Power consumption 17 W Dimensions 270 � 60 � 188 mm (w/h/d) Mass 1.3 kg
Laser diode properties
� Material : GaAlAs � Wavelength : 1 = 780 nm � Emission duration : Continuous � Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block)
Inputs/Outputs on the rear
Serial I/O port (1)
SCPH-9003
General
Power requirements 110-240 V AC, 50/60 Hz Power consumption 11 W Dimensions 270 � 60 � 188 mm (w/h/d) Mass 1.2 kg
Outputs on the rear
AV Multi out port (1)
Laser diode properties
� Material : GaAlAs � Wavelength : 1 = 780 nm � Emission duration : Continuous � Laser output : Less than 44.6 µW (measured at a distance of 200 mm from the lens surface on the optical pick-up block)
Inputs/Outputs on the rear
Serial I/O port (1)
Supplied accessories
AC power cord (1) A/V connecting cable (1) Analog controller (1) Instruction manual (1)
Outputs on the rear
AV Multi out port (1)
Inputs/ Outputs on the front
Controller ports (2) Memory card slots (2)
Supplied accessories
AC power cord (1) A/V connecting cable (1) Analog controller (1) Adapter Conversion 2P (1) Instruction manual (1)
Inputs/ Outputs on the front
Controller ports (2) Memory card slots (2)
Design and specifications are subject to change without notice.
�2�
|
|
 |
> |
|