Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 8 (click to view)
A
CD selection and care
With this system, you can only play CDs having this mark. (A) Note on CD-R and CD-RW This unit can play CD-R and CD-RW recorded with CDDA or WMA/MP3. Use an audio recording disc for CD-DA and finalize* it when you finish recording. The unit may not be able to play some discs due to the condition of the recording. * A process performed after recording that enables CDR/CD-RW players to play audio CD-R and CD-RW. Do not; l use irregularly shaped CDs. ( B ) l attach extra labels and stickers. l use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. ( C) l attach scratch-proof covers or any other kind of accessory. l write anything on the CD. l clean CDs with liquids. (Wipe with a soft, dry cloth.) l use CDs printed with label printers available on the market.
To prevent damage
Always observe the following points. Set the system on a flat, level surface. l Do not set it on top of magazines, inclined surfaces, etc. l Do not move the system while tray is opening/closing, or when loaded. Always unload all CDs before moving the system. l Do not put anything except a CD in the tray. l Do not use cleaning CDs or CDs which are badly warped or cracked. l Do not disconnect the AC power supply cord from the household AC outlet during CD changing operation.
B
Setting the time
Press [8] to turn the unit on. Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button: CLOCK zPLAY zREC Original display
This is a 12-hour clock. The example shows how to set the clock for 2:15am.
1 2 3
Within 7 seconds: Press [u 2/REW] or [i 1/FF] to set the
time.
Press and hold to change the time faster.
4
Press [CLOCK/TIMER].
The time is set and the original display is restored.
Displaying the clock: Press [CLOCK/TIMER]. The clock is shown for about 5 seconds. Note The clock may lose or gain some time over a period. Readjust if necessary.
