|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
 ;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
E
Warning When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo sockets. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R) sockets of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) leads dangling.) To enjoy DTS Digital Surround� playback, an external 5.1 channel DTS Digital Surround� decoder system must be connected to the OPTICAL DIGITAL AUDIO OUT socket or of the DVD video player.
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an MPEG2 audio decoder To OPTICAL type digital audio input Optical digital lead (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).
Amplifier equipped with a digital audio input To OPTICAL type digital audio input Optical digital lead (not supplied)
Notes: � DO NOT connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player. � Connect the OPTICAL DIGITAL AUDIO OUT socket of the DVD video player to the �OPTICAL� of a Receiver or Processor. � Refer to the owner�s manual of the connected equipment as well. � When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. � The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver�s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. � Turn off the amplifier before you connect or disconnect the DVD video player�s mains lead. If you leave the amplifier power on, the speakers may be damaged.
15
2C02021A [EN] P12-15 15 19/3/04, 4:50
|
|
|
> |
|
