|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
1-4-2. Tray Mounting <The First Tray 1 Mounting> 1. Mount the first tray 1 by fitting to the bosses at two locations after sliding the upper wing to the inner side. 2. Slide the first tray 1 to front side (arrow A direction) until it stops.
Upper wing (mounted with the first tray 1 .) Upper side
<Tray mounting> 1. Remove the gear (1). 2. Insert the tray (2) horizontally. 3. Set the gear (1) to fit the rack gear of the tray. 4. Insert the tray (2) to the inner side until it stops. 5. Turn the gear (3) to confirm the movement.
Rack gear of tray
Lower side Lower wing Boss Upper wing
First tray 1 Label of first tray
Gear (1)
Gear (1)
1
A
Lower wing
Tray (2)
Gear (3)
Fig. 2-1-25 <The Second Tray 2 Mounting> 1. Insert the second tray 2 along the lower groove. 2. Turn the gear clockwise until it stops and descend the tray.
Insert along the lower groove. Tray
Fig. 2-1-27
2
Gear
Second tray 2
Fig. 2-1-26
|
|
|
> |
|
