|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
;
thanks you are the best.Very good detail, Quick service response. A useful service manual with all details.
;
Great service!!! Polecam gorąco wszystkim zainteresowanym
;
I liked the price plus it had everything i needed to service the tv.
thankyou Tim Hertz
;
The manual is excellent, well detailed, and divided into two parts. Received very quickly. Thank you.
1-10
No video picture, no sound.
Trouble shooting chart
No video picture, no sound.
Check whether all the voltages from the power board to the decoder board are normal.
No Check the loaded circuit
CVBS(R1 point) waveform
Yes
Check if the reset circuit consisting of CE3, D6 and R21 is normal (at a high level for tens of milliseconds, then constantly at 3.3V).
No Change CE3, D6 and R21.
27Mhz waveform
Yes Crystal oscillator Y2 and
Check whether there is 27MHz signal output.
No
peripheral components are defected or eroded.
Yes
Check if there is 135MHz signal output on R31.
No
Check whether short-circuit or bad solder on U1,U3
SDRAM(R31 PCLK) waveform
No
Yes
Check if short-circuit and bad solder exist on Pin 60
Check U2. No
Yes Yes Reconnect the component in
|
|
|
> |
|
