|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
To set the decoder We have already described, how to connect a decoder for pay-TV station as DECODER or PREMIERE on page 13-14. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start.
Recording from another video recorder With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder. Note:
In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A.
1. Press VCR MENU.
The main menu will appear on the TV screen. Press F or G to select the DECODER. Press ENTER/OK. 2. Press D or E to select. ON: When the decoder is connected to the AV2 socket. OFF: When another VCR is connected to the AV2 socket.
1. VCR A should be connected to the SCART socket
on the rear panel of your unit or the AV jacks on the front panel of your unit.
2. Insert the recorded tape into VCR A and a blank
tape into VCR B.
3. Press VCR MENU to return to a TV picture.
3. To start recording, press the REC O on VCR B
and PLAY
G
on VCR A.
Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC/OTR button. Note:
If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc.
4. When you want to finish copying,
press STOP I on this video recorder and then STOP I the VCR A.
Video Head Cleaning Whenever a video cassette is inserted into or ejected from your DVD+VCR the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary. However, dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might.
1. Insert Disc
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2. Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3. Press DVD so that the DVD indicator lights up. 4. Copy the DVD to VHS Tape
Press the REC O button on the unit front panel.
� �
The DVD will go into Play mode and the VCR will go into Record mode. If the DVD disc menu appears, you may need to press the Play button manually to begin copying.
5. Stop the Copy Process.
Press STOP I.
1-48
Operation
|
|
|
> |
|
