TOSHIBA SD-35VFSF
Service Manual

Selecting the Protecting Recorded Recording a Programme
Before recording a programme, must have preset This function enables you record up to nine hours � SP (Standard Play) to pages 17~21. record on the tape. length of time. Switch on the television.

Recording Speed Cassette Immediately with Automatic Stop
Video cassettes have a safety tab to prevent accidental You can record a cassette at two different speeds: the corresponding station (unless you are recording via erasure. When this tab has been removed, cannot an external video source). If you have not done so, refer Your DVD-VCR stops automatically after the requested

(LP) of programmes.

� LP (Long Play)

In Long Play modes: Switch on the television.

1 1
If you wish to protect a cassette, break off the tab Insert cassette on which the programme is to be recorded, with window visible and the safety tab Insert video tape into VCR deck, intact or the opening covered with adhesive tape. Press window visible and safety tab intact or the The DVD-VCR is switched on automatically. the SPEED button to select SP or LP. opening covered with adhesive tape. The DVD� The selected record speed will appear on the VCR is switched on automatically. Select station to be recorded by pressing the PROG button or select the source (AV1, AV2, or AUX) by pressing the INPUT SEL. button Select station by pressing the PROG for a satellite tuner or external video source. To re-record over a protected cassette (safety tab pressing INPUT SEL. button for a satellite programme can be seen on the television. broken), cover the hole with adhesive tape. tuner or external video source. The station number is displayed and programme can be seen on Select recording speed by pressing the SPEED the television. button (refer to page 26).

� Each cassette lasts twice as long � The recording is of a slightly lower quality using a small screwdriver.

1
2 3 4 4
page 26). screen and DVD-VCR display. An index is recording. increase the recording time in: The record indicator appears on the television and � 30-minute intervals up to four hours tape (refer to page 34). E300 300 mins. or 5 hours The length is displayed on the television displays. The selected programme is recorded for the length time requested. At end of that time, the To stop recording, press the � button once. DVD-VCR stops recording automatically and � If your DVD-VCR ejects the cassette when you power off. The station number is displayed and button select the source (AV1, AV2 , or AUX) by

2

1 2

front panel display.

3

Hold down the REC (�) button for a while to start Select recording. recording speed by pressing the The record indicator appears on the television SPEED button many times as required (refer to

VCR Functions

VCR Functions

5
recorded on the tape (refer to page 34).

Type Recording Time (in SP)

E180 180 mins. or 3 hours Hold down for a while start Press the REC (�) button several times to

5 6 6
� If you reach end of the tape while recording, PRESS REC �

E240 240 mins. or 4 hours

E260 260 or 4 and 20 mins. DVD-VCR display. An index is recorded on the � 1-hour intervals up to nine hours

start recording, check to make sure that the cassette�s safety tab is intact or that the opening (created by a broken safety tab) is covered with LENGTH 2:30 adhesive tape. the cassette rewinds automatically.

SET LENGTH :

If you wish to cancel recording before the end, press the ON/STANDBY button.

7
� If end of the tape is reached while recording, the recording stops and power off.

Operating Instructions

26 English 27

12-11