CONNECTING VIDEO/AUDIO EQUIPMENT
Front panel
S-VIDEO
VIDEO
L-AUDIO-R (MONO)
R
L
VIDEO
S-VIDEO OUTPUT
INPUT 4
V
L
R
R
L
V
Video movie/VCR
INPUT jacks
There are 4 sets of inputs for VCR and DVD/LD players. Use RCA-type pin plug cords (the same as those used in Hi-Fi systems) for connections. When the audio source to be connected is monaural, connect the source to the L-(MONO) jack.
COMPONENT VIDEO INPUT jack
Inputs three signals � Y, PB (CB) and PR (CR) � output from DVD players and the like. Input formats in which images can be received. Format DVD player, etc. Digital tuner, etc. 480 i 1080 i 480 p Horizontal frequency 15.734 kHz 33.75 kHz 31.468 kHz Vertical frequency 60 Hz 60 Hz 60 Hz
MONITOR OUTPUT jacks
These are used for connecting the monitor to a VCR for recording, or for linking it to another monitor. These jacks output the video and audio signals of the source currently selected by the INPUT SELECTOR. Connect these output jacks to your VCR's inputs. Connect the VCR's outputs to the monitor's VIDEO inputs.
RGB INPUT jack
Inputs five signals � R, G, B, H and V � output from digital tuners and the like. Input format in which images can be received. Format Digital tuner 1080 i Horizontal frequency 33.75 kHz Vertical frequency 60 Hz
S-VIDEO INPUT jacks
� Inputs S-VHS video signals or signals from a DVD/LD player that has an S-VIDEO output jack. � When the signal input from the S-VIDEO INPUT jack is output from the MONITOR OUTPUT jack, the output signal will be a composite of Y and C.
NOTES: � SPLIT screen, FREEZE screen and SEARCH screen functions cannot be used when 1080i or 480p component signals are input. � Signals from MONITOR OUTPUT jacks will not be output when component signals or RGB signals are input. � The RGB input jack is designed for use in connecting a digital tuner with RGB signal output, and it should accordingly never be used for connecting to a personal computer or other device.
16
<ARB1528>
