|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
Troubleshooting
C
Tracking driving signal is outputted from IC201 159pin(TRO)?
Y
N
F
Tracking driving signal is outputted from IC401 31,32pin on the basis of 2.5?
N
Check pattern from IC201 159 pin to IC110 5pin and connection from IC110 4pin to R408.
Y
Connection state between CN101 1,4 pin and IC401 31,32pin is normal?
N
Check CN101 soldering and pattern between CN101 and IC401
Y
Resistance between 1 and 4 pin is about 6.2§� after removing FFC connected with Pick-up from CN101 connector?
N
Replace Pici-up
Y
Check connection state among Feed Motor and spindle Motor and CN401, CN402
Samsung Electronics
3-15
|
|
|
> |
|
