|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very Good! All the diagram are easy to read, and its complete.
;
This was an excellent source of detailed assembly information on a device which is at least 12 years old. A very lucky find, coupled with great service.
;
Excellent Service Manual and best price on the Internet. This Service Manual covers everything you could ever need including full circuit schematics, component layout diagrams, stripdown procedure and full parts list/breakdown. I needed this to carry out a modification to one of these headunits and this manual covered everything I needed. Fast delivery, processed within a few hours.
 ;
Thought I would never find a copy of the Technics SX-EN2 Service Manual until I found Owner-Manuals.com. Price was very fair and I received the download promptly. While a photocopy, it is quite readable and includes all the pertinent information and diagrams. Thank you Owner-Manuals!
;
I really like this manual and it's reliable.I found and bought easly.thank you.
DISASSEMBLY INSTRUCTIONS
1-6: DVD DECK (Refer to Fig. 1-6) 1. Make the short circuit on the position as shown Fig. 1-6 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged. 2. Disconnect the following connectors: (CP2601, CP2602, CP2603). 3. Remove the 4 screws 1. 4. Remove the DVD Deck in the direction of arrow.
1 1 1 11 11 1
Make the short circuit using a soldering. Pick Up PCB
1-8: AV PCB/RELAY PCB (Refer to Fig. 1-8) 1. Remove the 6 screws 1. 2. Remove the 2 screws 2. 3. Remove the AV PCB and Relay PCB in the direction of arrow.
2
Relay PCB
AV PCB
2
DVD Deck
1
1
Fig. 1-8
Fig. 1-6 1-7: DVD PCB (Refer to Fig. 1-7) 1. Disconnect the following connectors: (CP2001 and CP8002). 2. Remove the 4 screws 1. 3. Remove the 3 screws 2. 4. Remove the screw 3. 5. Remove the DVD PCB in the direction of arrow.
1 1 1 1
DVD PCB
3 22 2
Fig. 1-7
B1-2
|
|
|
> |
|
