|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Complete MFG Service Manual at a good price FAST !
;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
1.2 The initial screen is not displayed on the LCD. If the initial screen is not displayed on the LCD, check the following items. (1) Check the LED on the front If the LED does not light, proceed to 1.1. (2) Check the backlight If the backlight does not light up, separate the DVD player into top assembly and bottom assembly, and check the LCD harness and the connectors for defects. If the connector harness is broken: Replace the broken harness. If the connector harness is not broken: Remove the LCD cover and plate of the LCD unit and check the following: Check the connector of the FL harness, repair connectors. If the connectors are good, replace the FL inverter or the LCD. (3) Check the lighting of LCD If the LCD does not light, separate the DVD player into the top assembly and bottom assembly, and check the LCD harness and the connectors on the main board. If the connector is broken: Replace the LCD harness or the main board. If the connector is not broken: Remove the LCD cover and plate of the LCD unit, and check the connection to the harness of the LCD unit. If a bad connection is found. Connect the LCD harness to the LCD unit. Other than the above Replace the LCD unit or the main board.
|
|
|
> |
|