|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
SD-NX10W
Check in the test mode. � The spindle motor does not rotate.
Is waveform output from the pins 25 of IC1201 in the step 4 of AUTO auxiliary adjustment mode of TEST mode ? Yes Is waveform output from the pins 9 and 10 of IC1601 and the pins 4 and 5 of CN1401 ? Yes Replace with a spindle motor (complete). Check IC1601, CN1402, and soldering of mechanism switch PWB. No No Check the pins 25 of IC1201, soldering of peripheral circuit, and parts.
� The sled motor does not rotate.
Do the pins 23 of IC1201 change with the No Do the pins 14 and 15 of IC1601 and the pins 1 and 2 of CN1401 change with the / button ? Yes Does voltage of the + and - terminals on the sled motor change with the / button ? Yes Replace the sled motor. Check the soldering connected to the sled motor and for disconnection. No Check IC1601 and soldering of CN1401. / button ? Yes Check the waveform of pins 23 of IC1201, peripheral parts, and soldering.
No
� 82 �
|
|
|
> |
|
