|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
1.2 The initial screen is not displayed on the LCD. If the initial screen is not displayed on the LCD, check the following items. (1) Check the LED on the front If the LED does not light, proceed to 1.1. (2) Check the backlight If the backlight does not light up, separate the DVD player into top assembly and bottom assembly, and check the Harness, and check the connectors for defects. If the Harness is broken: Replace the broken harness. If the Harness is not broken: Remove the LCD Mask and CD Unit and check the following: Check the connectors of the Harness, replace the LED PCB or the LCD Unit. If the connectors are good, replace the LED PCB or the LCD Unit. (3) Check the lighting of LCD If the LCD does not light, separate the DVD player into the top assembly and bottom assembly, and check the Harness, and check the connectors on Main PCB. If the connector is broken: Replace the Harness or Main PCB. If the connector is not broken: Remove LCD Mask and LCD unit and check the connection to the harness of the LCD unit. If a bad connection is found. Connect the Harness to LCD unit. Other than the above Replace the LCD unit or the Main PCB.
|
|
|
> |
|
