|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
1.2 The initial screen is not displayed on the LCD If the initial screen is not displayed on the LCD, check the following items. (1) Check the LED on the front If the LED does not light, refer to 1.1. (2) Check the back light If the back light does not light up, separate the DVD player into the top assembly and bottom assembly, and check the inverter harness MH94 (Check whether or not the connector side is broken.), and check the connectors for defects. a) If the connector harness is broken : Replace the broken harness. b) If the connector harness is not broken : Remove the LCD cover and plate of the LCD unit and check the following. � If the FL inverter harness is not inserted completely or disconnected, reconnect the harness properly. � Other than the above: Replace the FL inverter or the LCD. (3) Check the lighting of LCD If the LCD does not light, separate the DVD player into the top assembly and bottom assembly, and check the LCD harness MH96 (Check whether or not the connector side is broken.), and check the connectors on the main board. a) If the connector is broken : Replace the LCD harness or the main board. b) If the connector is not broken : Remove the LCD cover and plate of the LCD unit and check the following items. c) Check the connector of the LCD harness connected to the LCD module (check of insertion with slant or others) If the LCD harness is not inserted completely or disconnected, reconnect the harness properly. d) Other than the above: Replace the LCD module or the main board. 1.3 The DVD drive does not work When the DVD drive does not work after the power is turned on, check the following items and repair or replace the defective parts. (1) Press the DISK cover switch (S102) at the center of the DVD player and turn on the power. Then check whether or not the optical pick-up lens of the DVD drive light. < CAUTION > Visible laser radiation when open and interlock defeated. Do not stare into laser beam. The optical pick-up lens lights dim : It is caused by deterioration of the optical pick-up lens. Replace the DVD drive. The optical pick-up lens does not light : Check the connectors of the DVD-FFC. Also check the connection to the main board and to the DVD drive. Repair the connections and check the operation of the DVD drive again. Check whether or not the DVD-FFC is broken. (If the DVD-FFC is broken, replace it.) Other than the above Replace the DVD drive or the main board. [Perform pick short of the DVD drive.] After replacing the DVD drive or the main board, special adjustments in TOSHIBA are required. If not, readout of DVD or CD media might not function properly. Insert a DVD disk and turn on the power. Check whether or not the DVD drive works. The DVD drive does not work. Adjust the DVD drive. If the drive does not work after the adjustment, the motor portion of the DVD drive or the main board is defective. Replace it. After replacing the DVD drive or
|
|
|
> |
|
