|
|
|
Who's Online
There currently are 5526 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Well done scan of a useful manual. It will be useful in my workbench!!
 ;
Excelent scan job. It's a fully detailed service manual of this model.
;
Do a quick order, scan quality is high.
I recommend to all!
;
This manual is perfect! Just what I needed. Thanks!
;
This manual was very clear and complete, the prices can't be beat, great to have older manuals available!
1.3 The DVD drive does not work. When the DVD drive does not work after the power is turned on, check the following items and repair or replace the defective parts. (1) Press the DISC cover switch and turn on the power. Then check whether or not the optical pick-up lens of the DVD drive lights. CAUTION: Visible laser radiation when open and interlock defeated. Do not stare into Laser beam. The optical pick-up lens lights dim: It is caused by deterioration of the optical pick-up lens. Replace the DVD drive. The optical pick-up lens does not light: Check the connectors of the DVD-FFC. Also check the connection to the main board and to the DVD drive. z Loose connection is found. Repair the connection, and then check the operation of the DVD drive again. z The DVD-FFC is broken. Replace the DVD drive. z Other than the above. Replace the DVD drive or the main board. (2) Insert a DVD disk and turn on the power The DVD drive does not work: The motor of the DVD drive or the main board is defective. Replace the DVD drive or the main board. The DVD drive works but the initializing operation of the optical pick-up lens does not start (the optical pick-up lens operates twice), or abnormal noise sound: The DVD drive is defective. Replace the DVD drive. 1.4 The operation of the DVD player stops at initializing display. If the DVD player does not work after the initializing screen is displayed, check the indication on the screen. Then repair the defect according to it. (1) Insert a DVD disk and close the DISC cover, and turn on the power. Then check the LCD screen or use an external display. z The message �loading� is not displayed or the operation stops at the message �Loading�. Since the DVD drive or the main board is defective, check in the following order: 1) DVD drive 2) Main board z The message �CHECK DISK� is displayed. Check the DVD disk for fingerprints, dirt, etc. If the DVD disk is OK, then check the following items: 1) Check the DVD-FFC If a loose connection, repair the connection. If it is damaged, replace the DVD drive. 2) Other than above For other cases, replace the unit in the following order: z DVD drive (defective optical pick-up) z Main board
|
|
|
> |
|
