|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
5. Initialization (Differs according to destination) After executing the test mode, be sure to perform initialization. � For J/SP/AEP Version (Use this procedure) While pressing the AC-3 RF button and DIGITAL3 buttons simultaneously, press the POWER button. When the VOLUME LED starts blinking, release the buttons. �initialized (J/SP/AEP)� will be displayed on the fluorescent display tube, and all internal settings will be returned to the initial values. � For U/CA version (Do not use this procedure) While pressing the AC-3 RF button and DIGITAL4 buttons simultaneously, press the POWER button. When the VOLUME LED starts blinking, release the buttons. �initialized (U/CA)� will be displayed on the fluorescent display tube, and all internal settings will be returned to the initial values. NOTE: As all histories of abnormal DSP operations will be erased, note down the contents of the history beforehand. 6. Check of Pressing of Unintended Button � This check is always performed when the power is turned ON. Therefore when an error occurs, it can be known without setting the test mode because the VOLUME LED blinks and the fluorescent display tube stops displaying. � When an unintended button is pressed during the test mode or initialization, the VOLUME LED also blinks, and the fluorescent display tube stops displaying, preventing no mode to be set. 7. Other Functions In the personal use of the unit at home, if no sounds are produced due to DSP problems, the DSP will be rebooted automatically to attempt recovery. If no sounds are still produced after five retries, �Turn POWER SW off!� will be displayed on the fluorescent display tube. If this problem occurs, it indicates that the DSP is faulty or the user�s setting environment may be unsuitable. Refer to �3. SelfDiagnosis Mode for Servicing/Display of History of DSP Errors� on page 13 to identify the problems.
� 15 �
|
|
|
> |
|
Home
