PIONEER S-DV222
Service Manual

03

Getting started

1 2

If the system isn�t already on, press STANDBY/ON to switch it on. Press ROOM SETUP. � If you have previously set up the room type and seating position, the display will show the current room settings. Press ENTER.

� For a more detailed surround sound setup, see Setting up surround sound on page 55.

Using the on-screen displays
For ease of use, this system makes extensive use of graphical on-screen displays (OSDs). You should get used to the way these work as you�ll need to use them when setting up the system, using some of the playback features, such as program play, and when making more advanced settings for audio and video. All the screens are navigated in basically the same way, using the cursor buttons ( , , , ) to change the highlighted item and pressing ENTER to select it.

3

4 Use the / (cursor up/down) buttons to select a room type then press ENTER. Choose one of the following depending on your room size: � S � Smaller than average room � M � Average room � L � Larger than average room 5 Use the / (cursor up/down) buttons to select a seating position setting, then press ENTER. Choose one of the following depending on where your main listening position is: � Fwd � If you are nearer to the front speakers than the surround speakers � Mid � If you are equal distance from the front and surround speakers � Back � If you are nearer to the surround speakers than the front speakers

� Throughout this manual, �Select� means use the cursor buttons to highlight an item on-screen, then press ENTER.

� The Room Setup automatically sets up both channel level and channel delay. If you have already set the channel levels manually (see Setting the channel levels on page 57), you will see Room Set? in the display when you first press the ROOM SETUP button. � Using the Room Setup will overwrite any previous settings you had for channel level and channel delay.

20
En