|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
Front
Surround Center
ORDER NO.
RRV3199
SPEAKER SYSTEM
S-DV434STXCN
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
CS Assy ( Front ) The grille assy is attached to the cabinet by 9 external screws. To detach it, first remove 3 screws of connection part with the base assy. Next remove 2 screws of the cosmetic plate assy lower side. Next remove 7 screws of the cabinet. Then carefully disconnect the wires of the woofer mounted on the grille assy and input terminal. To detach the cosmetic plate assy, remove 2 screws of connection part with the grille assy. The woofer is attached to the grille by 4 internal screws. To detach it, first unfasten those screws. Next remove the cable. When attaching it, face its terminal upward. The tweeter is attached to the baffle by adhesives. To exchange the tweeter, do it with the grille assy. The cosmetic plate assy is attached to the grille assy by 2 internal screws. To detach it, first remove the grille assy. Next unfasten those screws. CS Assy ( Surround ) The grille assy is attached to the cabinet by its bosses. To detach it, pry it open by inserting a flat blade screw driver into lower slot. To attach it, press it to the inner baffle. The speaker unit is attached to the inner baffle by 4 external screws. To detach it, first remove the grille assy. Next unfasten those screws, and remove the cable. When attaching it, face its terminal downward. CS Assy ( Center ) The grille assy is attached to the cabinet by 8 external screws. To detach it ,unfasten those screws. The speaker unit, together with the grille assy, is attached to the cabinet by 4 external screws. To detach it, first remove the grille assy. Next remove the cabinet. Then remove the cable. When attaching it, face its terminal toward the input terminal.
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION
PIONEER CORPORATION 2005
T � ZZK JULY 2005 Printed in Japan
|
|
|
> |
|
