PHILIPS SE4353S/05
Owner's Manual

EN
3.

Telephone answering machine (TAM)
If the access code is correct, a long beep tone can be heard. If there are new messages, all the new messages will be played immediately and then stop when there are no more new messages. If there are no new messages, the answering machine will not play any messages. The following table indicates how to access the below features during remote access procedure:

1 2 3 4 0

Replay current message or go to previous message. Play old messages or stop them. Go to next message. Delete current message. Turn the answering machine on/off.

Call screening
Handset call screening
If Handset Call screening is set to On, when there is an incoming message, you can press m to listen to the message. If you decide to pick up the call, press r. Once the call has been picked up, the recording will stop automatically. If you press

e, the call will be cut off and the recording will be ignored.

Set Handset Call Screening 1. Press m, scroll : to Answ. Machine and press OK, scroll : to Settings and press OK, scroll : to
HS Screening and press OK. 2. 3. The last selected option is ticked. Scroll : to On or Off and press OK to confirm. If you have multiple handsets, only 1 handset can enable handset call screening for each call.

Base Call Screening
If Base call screening is set to On, you can hear the incoming message via the loudspeaker of the base station. If you press e, the call will be cut off and the recording will be ignored.

Set Base Call Screening 1. Press m, scroll : to Answ. Machine and press OK, scroll : to Settings and press OK, scroll : to
BS Screening and press OK. 2. 3. The last selected option is ticked. Scroll : to On or Off and press OK to confirm. By default, the call screening on base unit is activated and call screening on handset is deactivated.

54