|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
again you did a very good job. It was fast too. Photocopy are really readable and clear
 ;
Probably it never existed a 1081 official service manual from Commodore, it's look more like a NAPCEC service manual & diagrams compilation of the 1084 series and his variants, like the nap6523, 8cm505, 1084S, 1084P and obviously the 1081. It's more complete than other scans and the quality of the scans also are far superior. It has two circuit diagrams variants of the 1081, mono and stereo versions. It doesn't include a diagram for the Philips CM8500 or CM8501, they look like the 1081 but they are slightly different.
;
Rapid, clear well done as all the scheme I downloaded from this site. Great job very functional and very useful
;
Great copy of the manual, has all information required for servicing,
;
I work at an authorized service center and I can tell if a manual is as it should be. This one is. It may be a scan, but a very good one at that. The interesting part for me was the curcuit diagram which was scanned at high quality, making it as good as the original. I will definitely be back as a customer. I need not say this, but I will: the price was the best. Thank you owner-manuals.com .
Surround
Front
Subwoofer
Center
ORDER NO.
RRV3421
SPEAKER SYSTEM
S-EV7V
S-EV7V
1.1 FRONT SPEAKER
The grille assy is attached to the cosmetic baffle by catches. Detach by pulling it toward you. The catch is attached to the cosmetic baffle by press-fitting. To detach it, insert a sharp-pointed tool like an eyeleteer into each of side. To re-attach it, insert the holes of the cosmetic baffle assy by press-fitting. The cosmetic baffle is attached to the inner baffle by its bosses. To detach it, pry it open by inserting a flat blade screwdriver into lower side. The woofer is attached to the inner baffle by 4 screws with the screw heads facing the baffle. To detach it, first remove the cosmetic baffle, next disconnect the cord to tweeter. Then unfasten those screws. When re-attaching it, face its terminal upward. The tweeter is attached to the cosmetic baffle by 2 internal screws. To detach it, first remove the cosmetic baffle, next disconnect the cord to tweeter. Then unfasten those screws. When re-attaching it, face its terminal downward.
XJM/E
XJM/NC
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.2 SURROUND and CENTER SPEAKER
The grille assy is attached to the cabinet by 4 external screws. To detach it, unfasten those screws. When re-attaching it, it attaches, as the connection cord is under the speaker unit. ( Surround ) The grille assy is attached to the cabinet by 8 external screws. To detach it, unfasten those screws. When re-attaching it, it attaches, as the connection cord is under the speaker unit. ( Center ) The speaker unit is attached to the grille by 4 internal screws. To detach it, first remove the grille assy. Next unfasten those screws, and remove the cable. When re-attaching it, face its terminal leftward. (See to the backside of the grille assy.)
1.3 SUBWOOFER
The cosmetic baffle is attached to the cabinet by its bosses. To detach it, pry it open by inserting a flat blade screwdriver into lower slot. To re-attach it, clean the press-fitting part and apply a bit of adhesive . Then press it to the baffle. The woofer is attached to the back board of cabinet by 4 external screws. To detach it, unfasten those screws. When re-attaching it, face its terminal upward.
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
T � ZZS JULY 2006 Printed in Japan
|
|
|
> |
|
