|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
;
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
�
(1)
Setup example If the lead edge of the original was still not to the stopper, enter an optimum value.
Original Stopper Glass
(2)
If the image at the lead edge of the original were to deform, enter an optimum value to move to the glass side.
Original Stopper Glass
(3)
If the original were to override the stopper, enter an optimum value to move it to the glass side.
Original Stopper Glass
After finished selecting settings using test command 53; the screen shown in the illustration bellow will appear. Select one of the numbers from this screen then use the 10-key pad to enter a setting for items #1 through #15. SIMULATION No. 53 01 � 04: ORIGINAL STOP POINT SETUP. NOM 1 2 3 4 * * * * * * THIN SIMP * * DUP
05 � 06: (NO PROGRAM) 07 � 10: RADF SENSOR ADJUSTMENT. 07.REGIST 08.TIMING 09.EXIT REVERSAL 10.EMPTY
C 5
3
1~4
Set to between 0 and 15 as dictated by the copier's performance. The factory setting is "8".
�4�
|
|
|
> |
|
