|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
1
2
3
4
3. JIGS
SPEAKON (GGF1541)
1. Turn the black cap leftward and removed. (Don't turn rightward)
SPEAKER STAND for S-FL1
A Please make this stand by your side.
250 150 75 20 19
9 �� L
B
Part A
Part B
Part C
65
2. Loosen the screw and insert the speaker cable in the silver color hole of [1-] and [1+]. Next tighten the screws. (Part A)
Screw M8, Screw Length 35 [ mm ] Measure for abnormal sound, be sure to use the washer(M8) and the spring washer(M8).
C 11+ 2+ 2250
� Usually, [1+] is connected as [+] and [1-] is connected as [-]. � In case of the diameter of speaker cable is thin, please stick a tape etc. and make the diameter of cable thick. 3. After connecting the speaker cable, according to the thickness of a cable, it inserts in order of the adapter(for fixation) and the cap, and it turns rightward and fixes.
2 H O S E
D
E
� There is a lock mechanism. Disassembly will be impossible once it assembles. 4. Finish
F
S-FL1
1 2 3 4
9
|
