|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
1
2
3
4
3. JIGS
SPEAKON (GGF1541)
1. Turn the black cap leftward and removed. (Don't turn rightward)
SPEAKER STAND for S-FL1
A Please make this stand by your side.
250 150 75 20 19
9 �� L
B
Part A
Part B
Part C
65
2. Loosen the screw and insert the speaker cable in the silver color hole of [1-] and [1+]. Next tighten the screws. (Part A)
Screw M8, Screw Length 35 [ mm ] Measure for abnormal sound, be sure to use the washer(M8) and the spring washer(M8).
C 11+ 2+ 2250
� Usually, [1+] is connected as [+] and [1-] is connected as [-]. � In case of the diameter of speaker cable is thin, please stick a tape etc. and make the diameter of cable thick. 3. After connecting the speaker cable, according to the thickness of a cable, it inserts in order of the adapter(for fixation) and the cap, and it turns rightward and fixes.
2 H O S E
D
E
� There is a lock mechanism. Disassembly will be impossible once it assembles. 4. Finish
F
S-FL1
1 2 3 4
9
|
|
|
> |
|
