|
There are currently no product reviews.
 ;
OEM manual provided all schematics, board layouts and component specs necessary to facilitate unit maintenance. All pages were clear and readable.
;
Good condition and quality. Hard to find anywhere in Internet, only on this site.
 ;
Exactly what I needed to be able to bring the amp back to life... will come back to this site the next time I need schematics.
;
Information was accurate and very helpful.
However the continuity made it a little difficult to follow from one page to the next.
;
Very very good as usual very trustable site. Perfect!!!!!!
Install the staple cartridge in the stapler unit. Push the cartridge in until it clicks into place. Close the sorter front cover.
3. Close the sorter front cover, and remove the paper.
After removing the staple cartridge, close the sorter front cover.
Next, remove all the paper from the sort bins.
If staples jam:
�
If staples jam inside the staple cartridge, the staple lamp will light up.
1. Open the sorter front cover.
4. Install the new staple cartridge.
Before installing the new staple cartridge in the stapler unit, make sure that the tips of the staples are flush with the indicator line on the cartridge.
2. Remove the staple cartridge.
staple cartridge from the stapler unit.
Push up the stapler unit�s cartridge release lever, and remove the
� �
If they are not, pull the staples outward until they are. If they protrude beyond the indicator lines, cut them back so that they are flush with the lines.
1 2
Indicator line
2�5
 $4.99 SF-S54 SHARP
Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
