|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
SF-S55N 3) Set the hole position of two lead cams as shown below. L. Adjusting the stapler unit home position 1) Loosen the two screws (1), and move ahead the flag plate to adjust the home position of stapler unit.
4)
Holding the state of Step 3) above, put the belt (4) on the gear, return the flange (1) to its original position, and fix it with the E-ring (2).
J. Adjusting the tensioner 1) Loosen the tensioner fixing screw (1), and then tighten the tensioner fixing screw (1) in the position where the tensioner 2 (2) is stopped by the tension of spring (3). 2)
(Before removing the flag plate mark the fixing position.)
Make an adjustment so that the staple is located as shown below when corner stapling is performed.
K. Adjusting the tension of stapler unit shift drive belt 1) Loosen the tensioner fixing screw (1), and then tighten the tensioner fixing screw (1) in the place where the tensioner (2) is stopped by the tension of spring (3).
5�6
 $4.99 SF-S55N SHARP
Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
